NOTE: For users running MacOS 10.13 or later, download and install the latest version of NAS Navigator2 from Mac App Store.The subnet masks should be the same and the first three numbers of the IP addresses should be the same.For example, if the IP address and subnet mask of the computer are 192.168.0.10, 255.255.255.0 and the IP address and subnet mask of the LinkStation are 192.168.1.150, 255.255.255.0 then the updater will not work properly.
Buffalo Ls441D Nas Firmware 1.74 Mac App StoreIn this case, reconfigure the LinkStations IP address and subnet mask to 192.168.0.150, 255.255.255.0. Then they will be on the same subnet and the updater will work properly. About Us Ethics Statement Terms of Use Privacy Policy Change Ad Consent Advertise. In cases where file size was a limitation, a link is provided to download the additional files. The build script also checks if the files are available and downloads them as necessary. For a quick start, jump to buildnewrelease and read that paragraph.). The CentOS 7 base build contained all necessary programs to run these files. The latest version is also Ubuntu compatible but you need to install some dependencies: apt-get install binutils zip. These were usually downloaded from other parties and the scripts directory within firmwares contains the URLs where they were downloaded from. The get- scripts.). The scripts directory also contains some more complex scripts that you can copy to the Linkstation and run to set up specific environments. You might need to change a few things in your setup to make it work, best to run them line-by-line, the first time youre trying. The additions folder contains tar-gzipped changes to the firmware. These usually just get untared and dumped into the firmware source directory during build. These might contain new scripts, webpage changes or other files that the custom firmware use during run. The first step is to unzip the firmware into the src directory (created on the fly) and each of the files in this directory apply changes to the source. Then at the end Z-compile will re-zip the firmware so it can be downloaded and executed. When a component is upgraded, in this file you have to update the version number. For example PLEXBIN contains the version of Plex Media Server to use.). The vanilla firmware is too big for GitHub to store so if it doesnt exist (after cloning), it will try to download it and place it in the proper directory (firmwares). At the end you should have a src directory with the uncompressed firmware. If optware was installed before the firmware upgrade, it will keep the dependencies at boot after the upgrade. It also copies optware bootstrap files to rootoptware-bootstrap so if optware was not installed yet, you have an easy start. It also updates the web interface so Plex can be configured. It requires two command line parameters: a name for the new release and a subversion number. It takes three parameters: a name for the new release, a subversion number and an optional parameter dev to add the dev package into the firmware.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |